>INFO MAXINFO=1000 - Information block from data file... sno408m.dat mtmerge: date: Wed Sep 27 17:18:59 2000 files merged and reject rules and rho_a amplitude corrections used: file 1:sno408_all.dat 300:14000 1.00 1.00 file 2:400408.dat 0:300 1.00 1.00 Comment and Info blocks from each file file 1:sno408_all.dat # mtmerge: # date: Fri Nov 19 10:00:38 1999 # # files merged and reject rules and rho_a amplitude corrections used: # file 1:sno408_2r.dat 1:1500 1.00 1. # file 2:sno408_3r.dat 1500:20000 1.00 1. # # Comment and Info blocks from each file # # file 1:sno408_2r.dat # # tsrestack: version: v5.0 precision: SINGLE # # date: Fri Nov 19 09:56:54 1999 # # # # Coherence minima: # # 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 # # 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 # # Coherence maximum:.9999000 # # Maxtype: JKN # # Ntype: 1 # # Weight: Y # # # # Cascade files used: # # sno408/408a1401a1.cas # # sno408/408a1404a1.cas # # sno408/408a1411a1.cas # # sno408/408a1414a1.cas # # sno408/408a1418a1.cas # # sno408/408a1421a1.cas # # # # tscascade: version: v5.0 precision: SINGLE # # date: Fri Nov 19 09:55:32 1999 # # # # input ts window: sno408a1 # # remote ts window: sno421a1 # # # # process.cfg file:--- # # # # # process.cfg: version: v5.0 # # # # # # This file contains parameters that may be # # # altered for running tscascade and tsrestack # # # Parameters listed below are the default # # # values in the tscascade executable. # # # # # # A hash (#) in the first column comments the line # # # out. That variable is requested on execution # # # # # VER :v5.0 cfg file version # # NUMSTK:20 number of estimates per substack # # 32 32 32 32 16 16 16 16 8 8 8 8 8 8 8 8 4 4 # # VARTOL:0.0100 tolerance for minimum variance # # # Other parameters are allowed (remove # to use) # # OWRITE: T overwrite files without asking # # PROTYP: MT processing type: MT, GDS or HSG # # REMOTE: H type of remote: H or E (not requested if absent) # # #DECLIN: 0 sets declination # # #ROTANG: 0 sets rotation co-ord system # # MAG_OR: F correct magnetometer orientation using baselines # # P_NORM: T normalize spectra by horizontal magnetic field power # # STACK : T .TRUE. substacking # # JJANAL: T .TRUE. Jones-Joedicke processing # # MAXTYP: JKN max type: JKN, COH or VAR # # NTYPE : 1 param to minimize # # WEIGHT: T apply weighting # # COHMIN: 20*0.500 coherence minimum # # COHMAX: 0.999 coherence maximum # # UNITS : SI impedance units: SI or FIELD # # # # # # time series file from mp2ts # # date: Fri Nov 19 09:26:07 1999 # # # # input file: sno408/sno408a1.1mp # # # # Machine endian: Big # # UNIX set : T # # # # site description: tintina # # # # Latitude :061:43:22 N # # Longitude :132:07:34 W # # # # LiMS number : 59 # # Magnetometer number : 59 # # # # Ex line length (m): 100.00 # # Ey line length (m): 95.00 # # # # Azimuths relative to: MAGNETIC NORTH # # Ex azimuth; 0 # # Ey azimuth; 90 # # Hx azimuth; 0 # # Hy azimuth; 90 # # # # FIRST 22 POINTS DROPPED FROM .1mp FILE TO # # ACCOUNT FOR FILTER SETTLING # # # #F Filter block begin # #F # #F Filters applied to LiMS/LRMT data are: # #F 1: Analogue anti-alias six-pole Bessel low-pass # #F filters on each channel with -3 dB point at nominally 5 Hz. # #F -calibrated values given below # #F # #F 2: Digital anti-alias multi-stage Chebyshev FIR filters # #F with final stage at 2xsampling rate # #F # #F 1: Analogue single-pole Butterworth high-pass filters on the # #F telluric channels only with -3 dB point at nominally 30,000 s # #F -calibrated values given below # #F # #F Chan Calib Low-pass High-pass (s) # #F 1 1.00 0.20 0.00 # #F 2 1.00 0.20 0.00 # #F 3 1.00 0.20 0.00 # #F 4 1.00 0.20 30000.00 # #F 5 1.00 0.20 30000.00 # #F # #F In the tsrestack code, these filter responses are # #F removed using bessel7.f and high17.f # #F # #F Filter block end # # # # Azimuthal information of cascade decimates # # azimuth : 0 # # this azimuth is relative to TRUE NORTH if either the # # 1) data were recorded in TRUE NORTH, or # # 2) data were recorded in MAGNETIC NORTH and the # # correct declination has been applied # # # # Ex rotation: -28.2 # # Ey rotation: -28.2 # # Hx rotation: -28.2 # # Rx rotation: -28.1 # # # # declination: 0 # # coord_sys : MAGNETIC NORTH # # Ex azimuth : 0 # # Ey azimuth : 90 # # Hx azimuth : 0 # # Rx co_ord : MAGNETIC NORTH # # Rx azimuth : 0 # # # # # STATION :sno408 # STATION_RR:sno421 # AZIMUTH = 0.0 # LATITUDE = 61.7228 # LONGITUDE = -132.1260 # ELEVATION = 0.0 #------------------------------ # file 2:sno408_3r.dat # # tsrestack: version: v5.0 precision: SINGLE # # date: Fri Nov 19 09:59:34 1999 # # # # Coherence minima: # # 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 # # 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 # # Coherence maximum:.9999000 # # Maxtype: JKN # # Ntype: 1 # # Weight: Y # # # # Cascade files used: # # sno408/4081r4011r.cas # # sno408/4081r4041r.cas # # sno408/4081r4111r.cas # # sno408/4081r4141r.cas # # sno408/4081r4181r.cas # # sno408/4081r4211r.cas # # sno408/4081r287as.cas # # # # tscascade: version: v5.0 precision: SINGLE # # date: Fri Nov 19 09:59:30 1999 # # # # input ts window: sno4081r # # remote ts window: sno287as # # # # process.cfg file:--- # # # # # process.cfg: version: v5.0 # # # # # # This file contains parameters that may be # # # altered for running tscascade and tsrestack # # # Parameters listed below are the default # # # values in the tscascade executable. # # # # # # A hash (#) in the first column comments the line # # # out. That variable is requested on execution # # # # # VER :v5.0 cfg file version # # NUMSTK:20 number of estimates per substack # # 32 32 32 32 16 16 16 16 8 8 8 8 8 8 8 8 4 4 # # VARTOL:0.0100 tolerance for minimum variance # # # Other parameters are allowed (remove # to use) # # OWRITE: T overwrite files without asking # # PROTYP: MT processing type: MT, GDS or HSG # # REMOTE: H type of remote: H or E (not requested if absent) # # #DECLIN: 0 sets declination # # #ROTANG: 0 sets rotation co-ord system # # MAG_OR: F correct magnetometer orientation using baselines # # P_NORM: T normalize spectra by horizontal magnetic field power # # STACK : T .TRUE. substacking # # JJANAL: T .TRUE. Jones-Joedicke processing # # MAXTYP: JKN max type: JKN, COH or VAR # # NTYPE : 1 param to minimize # # WEIGHT: T apply weighting # # COHMIN: 20*0.500 coherence minimum # # COHMAX: 0.999 coherence maximum # # UNITS : SI impedance units: SI or FIELD # # # # # # time series file from ts_resamp # # date: Fri Nov 19 09:32:22 1999 # # # # input file =sno408/sno408a1.ts # # # # time series file from mp2ts # # date: Fri Nov 19 09:26:07 1999 # # # # input file: sno408/sno408a1.1mp # # # # Machine endian: Big # # UNIX set : T # # # # site description: tintina # # # # Latitude :061:43:22 N # # Longitude :132:07:34 W # # # # LiMS number : 59 # # Magnetometer number : 59 # # # # Ex line length (m): 100.00 # # Ey line length (m): 95.00 # # # # Azimuths relative to: MAGNETIC NORTH # # Ex azimuth; 0 # # Ey azimuth; 90 # # Hx azimuth; 0 # # Hy azimuth; 90 # # # # FIRST 22 POINTS DROPPED FROM .1mp FILE TO # # ACCOUNT FOR FILTER SETTLING # # # #F Filter block begin # #F # #F Filters applied to LiMS/LRMT data are: # #F 1: Analogue anti-alias six-pole Bessel low-pass # #F filters on each channel with -3 dB point at nominally 5 Hz. # #F -calibrated values given below # #F # #F 2: Digital anti-alias multi-stage Chebyshev FIR filters # #F with final stage at 2xsampling rate # #F # #F 1: Analogue single-pole Butterworth high-pass filters on the # #F telluric channels only with -3 dB point at nominally 30,000 s # #F -calibrated values given below # #F # #F Chan Calib Low-pass High-pass (s) # #F 1 1.00 0.20 0.00 # #F 2 1.00 0.20 0.00 # #F 3 1.00 0.20 0.00 # #F 4 1.00 0.20 30000.00 # #F 5 1.00 0.20 30000.00 # #F # #F In the tsrestack code, these filter responses are # #F removed using bessel7.f and high17.f # #F # #F Filter block end # # # # Azimuthal information of cascade decimates # # azimuth : 0 # # this azimuth is relative to TRUE NORTH if either the # # 1) data were recorded in TRUE NORTH, or # # 2) data were recorded in MAGNETIC NORTH and the # # correct declination has been applied # # # # Ex rotation: -28.2 # # Ey rotation: -28.2 # # Hx rotation: -28.2 # # Rx rotation: -27.0 # # # # declination: 0 # # coord_sys : MAGNETIC NORTH # # Ex azimuth : 0 # # Ey azimuth : 90 # # Hx azimuth : 0 # # Rx co_ord : MAGNETIC NORTH # # Rx azimuth : 0 # # # # # STATION :sno408 # STATION_RR:sno287 # AZIMUTH = 0.0 # LATITUDE = 61.7228 # LONGITUDE = -132.1260 # ELEVATION = 0.0 #------------------------------ # # Information block taken from file 1 # STATION :sno408 STATION_RR:sno421 AZIMUTH = 0.0 LATITUDE = 61.7228 LONGITUDE = -132.1260 ELEVATION = 0.0 ------------------------------ file 2:400408.dat #WRITTEN BY GEOTOOLS: 400_408 09/26/00 RAW RECS AZIMUTH = 0.0 LATITUDE = 61.7226 LONGITUDE = -132.1284 ELEVATION = 0.0 ------------------------------ Information block taken from file 1 STATION :sno408 STATION_RR:sno421 AZIMUTH = 0.0 LATITUDE = 61.7228 LONGITUDE = -132.1260 ELEVATION = 0.0 -