>INFO MAXINFO=1000 - Information block from data file... sno404m.dat mtmerge: date: Wed Sep 27 17:13:17 2000 files merged and reject rules and rho_a amplitude corrections used: file 1:sno404_all.dat 10:14000 1.00 1.00 file 2:400404.dat 0:10 1.00 1.00 Comment and Info blocks from each file file 1:sno404_all.dat # mtmerge: # date: Fri Nov 19 11:24:42 1999 # # files merged and reject rules and rho_a amplitude corrections used: # file 1:sno404_2r.dat 1:1000 1.00 1. # file 2:sno404_3r.dat 1000:20000 1.00 1. # # Comment and Info blocks from each file # # file 1:sno404_2r.dat # # tsrestack: version: v5.0 precision: SINGLE # # date: Fri Nov 19 10:59:18 1999 # # # # Coherence minima: # # 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 # # 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 # # Coherence maximum:.9999000 # # Maxtype: JKN # # Ntype: 1 # # Weight: Y # # # # Cascade files used: # # sno404/404a1414a1.cas # # sno404/404a1418a1.cas # # sno404/404a1421a1.cas # # sno404/404a1277a1.cas # # sno404/404a1273a1.cas # # sno404/404a1408a1.cas # # sno404/404a1401a1.cas # # # # tscascade: version: v5.0 precision: SINGLE # # date: Fri Nov 19 10:56:17 1999 # # # # input ts window: sno404a1 # # remote ts window: sno401a1 # # # # process.cfg file:--- # # # # # process.cfg: version: v5.0 # # # # # # This file contains parameters that may be # # # altered for running tscascade and tsrestack # # # Parameters listed below are the default # # # values in the tscascade executable. # # # # # # A hash (#) in the first column comments the line # # # out. That variable is requested on execution # # # # # VER :v5.0 cfg file version # # NUMSTK:20 number of estimates per substack # # 32 32 32 32 16 16 16 16 8 8 8 8 8 8 8 8 4 4 # # VARTOL:0.0100 tolerance for minimum variance # # # Other parameters are allowed (remove # to use) # # OWRITE: T overwrite files without asking # # PROTYP: MT processing type: MT, GDS or HSG # # REMOTE: H type of remote: H or E (not requested if absent) # # #DECLIN: 0 sets declination # # #ROTANG: 0 sets rotation co-ord system # # MAG_OR: F correct magnetometer orientation using baselines # # P_NORM: T normalize spectra by horizontal magnetic field power # # STACK : T .TRUE. substacking # # JJANAL: T .TRUE. Jones-Joedicke processing # # MAXTYP: JKN max type: JKN, COH or VAR # # NTYPE : 1 param to minimize # # WEIGHT: T apply weighting # # COHMIN: 20*0.500 coherence minimum # # COHMAX: 0.999 coherence maximum # # UNITS : SI impedance units: SI or FIELD # # # # # # time series file from mp2ts # # date: Fri Nov 19 10:37:02 1999 # # # # input file: sno404/sno404a1.1mp # # # # Machine endian: Big # # UNIX set : T # # # # site description: Burn area # # # # Latitude :061:45:14 N # # Longitude :132:04:26 W # # # # LiMS number : 53 # # Magnetometer number : 53 # # # # Ex line length (m): 100.00 # # Ey line length (m): 100.00 # # # # Azimuths relative to: MAGNETIC NORTH # # Ex azimuth; 0 # # Ey azimuth; 90 # # Hx azimuth; 0 # # Hy azimuth; 90 # # # # FIRST 22 POINTS DROPPED FROM .1mp FILE TO # # ACCOUNT FOR FILTER SETTLING # # # #F Filter block begin # #F # #F Filters applied to LiMS/LRMT data are: # #F 1: Analogue anti-alias six-pole Bessel low-pass # #F filters on each channel with -3 dB point at nominally 5 Hz. # #F -calibrated values given below # #F # #F 2: Digital anti-alias multi-stage Chebyshev FIR filters # #F with final stage at 2xsampling rate # #F # #F 1: Analogue single-pole Butterworth high-pass filters on the # #F telluric channels only with -3 dB point at nominally 30,000 s # #F -calibrated values given below # #F # #F Chan Calib Low-pass High-pass (s) # #F 1 1.00 0.20 0.00 # #F 2 1.00 0.20 0.00 # #F 3 1.00 0.20 0.00 # #F 4 1.00 0.20 0.00 # #F 5 1.00 0.20 0.00 # #F # #F In the tsrestack code, these filter responses are # #F removed using bessel7.f and high17.f # #F # #F Filter block end # # # # Azimuthal information of cascade decimates # # azimuth : 0 # # this azimuth is relative to TRUE NORTH if either the # # 1) data were recorded in TRUE NORTH, or # # 2) data were recorded in MAGNETIC NORTH and the # # correct declination has been applied # # # # Ex rotation: -28.2 # # Ey rotation: -28.2 # # Hx rotation: -28.2 # # Rx rotation: -28.3 # # # # declination: 0 # # coord_sys : MAGNETIC NORTH # # Ex azimuth : 0 # # Ey azimuth : 90 # # Hx azimuth : 0 # # Rx co_ord : MAGNETIC NORTH # # Rx azimuth : 0 # # # # # STATION :sno404 # STATION_RR:sno401 # AZIMUTH = 0.0 # LATITUDE = 61.7539 # LONGITUDE = -132.0740 # ELEVATION = 0.0 #------------------------------ # file 2:sno404_3r.dat # # tsrestack: version: v5.0 precision: SINGLE # # date: Fri Nov 19 11:02:50 1999 # # # # Coherence minima: # # 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 # # 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 # # Coherence maximum:.9999000 # # Maxtype: JKN # # Ntype: 1 # # Weight: Y # # # # Cascade files used: # # sno404/4041r4141r.cas # # sno404/4041r4181r.cas # # sno404/4041r4211r.cas # # sno404/4041r287as.cas # # sno404/4041r283as.cas # # sno404/4041r279as.cas # # sno404/4041r2771r.cas # # sno404/4041r275as.cas # # sno404/4041r2731r.cas # # sno404/4041r4081r.cas # # sno404/4041r4011r.cas # # # # tscascade: version: v5.0 precision: SINGLE # # date: Fri Nov 19 11:02:29 1999 # # # # input ts window: sno4041r # # remote ts window: sno4011r # # # # process.cfg file:--- # # # # # process.cfg: version: v5.0 # # # # # # This file contains parameters that may be # # # altered for running tscascade and tsrestack # # # Parameters listed below are the default # # # values in the tscascade executable. # # # # # # A hash (#) in the first column comments the line # # # out. That variable is requested on execution # # # # # VER :v5.0 cfg file version # # NUMSTK:20 number of estimates per substack # # 32 32 32 32 16 16 16 16 8 8 8 8 8 8 8 8 4 4 # # VARTOL:0.0100 tolerance for minimum variance # # # Other parameters are allowed (remove # to use) # # OWRITE: T overwrite files without asking # # PROTYP: MT processing type: MT, GDS or HSG # # REMOTE: H type of remote: H or E (not requested if absent) # # #DECLIN: 0 sets declination # # #ROTANG: 0 sets rotation co-ord system # # MAG_OR: F correct magnetometer orientation using baselines # # P_NORM: T normalize spectra by horizontal magnetic field power # # STACK : T .TRUE. substacking # # JJANAL: T .TRUE. Jones-Joedicke processing # # MAXTYP: JKN max type: JKN, COH or VAR # # NTYPE : 1 param to minimize # # WEIGHT: T apply weighting # # COHMIN: 20*0.500 coherence minimum # # COHMAX: 0.999 coherence maximum # # UNITS : SI impedance units: SI or FIELD # # # # # # time series file from ts_resamp # # date: Fri Nov 19 10:39:10 1999 # # # # input file =sno404/sno404a1.ts # # # # time series file from mp2ts # # date: Fri Nov 19 10:37:02 1999 # # # # input file: sno404/sno404a1.1mp # # # # Machine endian: Big # # UNIX set : T # # # # site description: Burn area # # # # Latitude :061:45:14 N # # Longitude :132:04:26 W # # # # LiMS number : 53 # # Magnetometer number : 53 # # # # Ex line length (m): 100.00 # # Ey line length (m): 100.00 # # # # Azimuths relative to: MAGNETIC NORTH # # Ex azimuth; 0 # # Ey azimuth; 90 # # Hx azimuth; 0 # # Hy azimuth; 90 # # # # FIRST 22 POINTS DROPPED FROM .1mp FILE TO # # ACCOUNT FOR FILTER SETTLING # # # #F Filter block begin # #F # #F Filters applied to LiMS/LRMT data are: # #F 1: Analogue anti-alias six-pole Bessel low-pass # #F filters on each channel with -3 dB point at nominally 5 Hz. # #F -calibrated values given below # #F # #F 2: Digital anti-alias multi-stage Chebyshev FIR filters # #F with final stage at 2xsampling rate # #F # #F 1: Analogue single-pole Butterworth high-pass filters on the # #F telluric channels only with -3 dB point at nominally 30,000 s # #F -calibrated values given below # #F # #F Chan Calib Low-pass High-pass (s) # #F 1 1.00 0.20 0.00 # #F 2 1.00 0.20 0.00 # #F 3 1.00 0.20 0.00 # #F 4 1.00 0.20 0.00 # #F 5 1.00 0.20 0.00 # #F # #F In the tsrestack code, these filter responses are # #F removed using bessel7.f and high17.f # #F # #F Filter block end # # # # Azimuthal information of cascade decimates # # azimuth : 0 # # this azimuth is relative to TRUE NORTH if either the # # 1) data were recorded in TRUE NORTH, or # # 2) data were recorded in MAGNETIC NORTH and the # # correct declination has been applied # # # # Ex rotation: -28.2 # # Ey rotation: -28.2 # # Hx rotation: -28.2 # # Rx rotation: -28.3 # # # # declination: 0 # # coord_sys : MAGNETIC NORTH # # Ex azimuth : 0 # # Ey azimuth : 90 # # Hx azimuth : 0 # # Rx co_ord : MAGNETIC NORTH # # Rx azimuth : 0 # # # # # STATION :sno404 # STATION_RR:sno401 # AZIMUTH = 0.0 # LATITUDE = 61.7539 # LONGITUDE = -132.0740 # ELEVATION = 0.0 #------------------------------ # # Information block taken from file 1 # STATION :sno404 STATION_RR:sno401 AZIMUTH = 0.0 LATITUDE = 61.7539 LONGITUDE = -132.0740 ELEVATION = 0.0 ------------------------------ file 2:400404.dat #WRITTEN BY GEOTOOLS: 400_404 09/26/00 RAW RECS AZIMUTH = 0.0 LATITUDE = 61.7537 LONGITUDE = -132.0760 ELEVATION = 0.0 ------------------------------ Information block taken from file 1 STATION :sno404 STATION_RR:sno401 AZIMUTH = 0.0 LATITUDE = 61.7539 LONGITUDE = -132.0740 ELEVATION = 0.0 -